Plywood and wood products from Vietnam — factory-direct, fully documented.
Film-faced, commercial and veneer plywood, primed finger-joint moulding and wood components — developed by LELOI and produced at our long-term partner mills, then shipped with the EUDR, traceability and certification evidence your customs broker and your compliance team will ask for.
Plywood, primed moulding, LVL and wood components — one point of contact for all of them.
Documentation and packing built for each destination's rules.
Geolocation, traceability and legality evidence with every order.
Our own people walk the production floor before every shipment.
Panels, millwork, and the machining that turns them into parts
Three groups, and they are not the same kind of offer. The first is what we press and profile. The second is what we do to it before it ships. The third is where we are investing but will not claim capability until we can prove it.
Core range — what we press and profile
Plywood
Film-faced, commercial, birch-faced, formwork with HDO/MDO overlay, and packing grade. The main line, and the one a European specification is usually written around.
Moulding & millwork
Primed interior trim in finger-joint pine or one-piece MDF, tooled to your drawing. The strongest line into the US market.
Solid wood & FJ panel
Acacia and rubberwood, finger-jointed and edge-glued, to 1300 × 6000 mm in AC and BC grades. Teak and live-edge tops on programme.
MDF & HMR
Carried because programmes need it alongside the rest, not pushed as a headline. Say the grade you need and we quote it.
Deep machining — cuts across every line
Send the drawing. Receive parts that assemble.
Cut-to-size on a beam saw holding ±0.5 mm
3-axis CNC routing — profile, groove, pocket
Chamfer, bevel, tongue-and-groove
Through and blind boring to pattern
DXF, DWG or dimensioned PDF accepted
Packed in your assembly sequence
One condition, stated plainly: nobody should send a drawing to a supplier who has not shown dimensional stability first. Ask us for the test evidence on the substrate before you send the file — a machining programme is built on the panel underneath it.
Machining capability
In development — researched, not yet claimed
Engineered / multilayer flooring
Europe has closed the door on Chinese supply and few Vietnamese mills are set up for it. We are looking at it seriously — and until the wear layer, core and emission certificate are settled, we are not going to quote it.
Cabinet components & vanities
The route into the US is machined parts, not finished cabinets: component sets and semi-finished work first. We would rather start where our machining is already proven than promise an assembled kitchen.
Open any line below for surfaces, specifications and real factory photos — then request a quote.
Film-Faced Plywood
Concrete formwork panels — smooth, high-reuse phenolic surface
Commercial Plywood
Multi-purpose panels for furniture, interior & packaging
Veneer-Faced Plywood
Decorative panels — natural veneer or melamine, ready to finish
Packing Plywood & Pallets
Cost-effective board for crates, pallets & industrial packaging
Primed Moulding & Millwork
Finger-joint pine or MDF, primed and ready for topcoat
Cut-to-Size & CNC Components
Send the drawing, receive parts that assemble
Finger-Joint Panel — Acacia & Rubberwood
Edge-glued panels to 1300 × 6000 mm — solid wood that stays flat
LVL & Other Wood Products
LVL, MDF, finger-joint panels, components & wood pellets
LELOI EXIM GLOBAL CO., LTD
Business registration / Tax ID 2802935153 — a registered Vietnamese exporter you can look up.
Where we actually are
No 775 Nguyen Trai Street, Hac Thanh Ward, Thanh Hoa Province, Vietnam
FSC CoC · CE EN 13986 · CARB P2 / TSCA · AS 6669
Certificates are issued per product and mill — we send the exact ones covering your order.
What we actually ship
Our mills run every month. Ask for the bills of lading behind any of these numbers.
Combined output across our mill network.
Delivered and cleared customs.
Ordering on a regular programme.
Exporting since 2015.
Factory 1
Product lines
Ships to
UAE · Japan · India · Australia
Factory 2
Product lines
Ships to
United States
Factory 3
Product lines
Ships to
Australia · European Union
Factory 4
Product lines
Ships to
United States
Countries we have shipped to
🇺🇸 United States · since 2018
Birch-faced plywood
~40 containers / month
Supplied to a distribution network for furniture and household products.
🇫🇷 France · since 2022
Film-faced plywood, 21 × 1250 × 2500 mm
8–10 containers / month
Construction formwork, repeat monthly programme since 2022.
We can arrange a reference call once a deal is serious.
Plywood loading in Vietnam
Certificates and shipping documents
Every certificate opens in full. Below them, bills of lading from shipments we have delivered.
FSC Chain-of-Custody
SGS Hong Kong
Open PDF
FSC Chain-of-Custody
SGS Hong Kong
Open PDF
CE — EN 13986 plywood
Istituto Giordano
Open PDF
FSC Chain-of-Custody
SGS Hong Kong
Open PDF
CARB Phase 2 / TSCA Title VI
ICTT Corporation (TPC-43)
Open PDF
FSC Chain-of-Custody
SGS Hong Kong
Open PDF
AS 6669-2016 formwork plywood
CMI Certification Pty Ltd (Australia)
Open PDF
CE marking — EN 13986
Istituto Giordano (Notified Body 0407)
Open PDFShipments we have delivered
Buyer details withheld — we protect our customers' confidentiality, including yours.
Sourcing from Vietnam shouldn't feel like a gamble
None of these are rare. They are the six ways an overseas wood order quietly goes wrong — and each one is a gap we close, whether you buy from our factory or use us to check someone else's.
You can't tell a factory from a trading desk
The website, the catalogue and the samples look identical. One has presses and a kiln; the other has a laptop and a markup. You only find out which after the deposit clears.
The bulk order doesn't match the sample
The approved sample is flawless. Then the core gets thinner, the glue grade drops, the face grade slips a notch — and you discover it when the container is already at your port.
Your compliance file has holes in it
EUDR needs geolocation and traceability. US buyers ask for CARB P2 / TSCA. Your supplier sends a photo of a certificate and hopes that's enough. It isn't — and the liability is yours, not theirs.
Nobody checks the goods before they sail
You can't fly to Vietnam for every production run. So loading happens unwitnessed, and the first inspection of your own cargo is the one you do after paying freight.
A dispute leaves you with nothing to hold
Chat messages and a pro-forma invoice are not a claim. Without contracts and evidence that stand up under Vietnamese law, there is no realistic route to recover anything.
Mixed orders mean juggling five suppliers
Film-faced from one, moulding from another, pallets from a third — five quality standards, five sets of paperwork, five chances for one late shipment to hold up your container.
If you import wood into the EU, the EUDR obligation is yours
Under the EU Deforestation Regulation, the operator placing goods on the EU market — the importer, not the Vietnamese supplier — files the Due Diligence Statement and carries the legal responsibility. Your supplier cannot do that for you. What they can do is give you evidence solid enough to file on. Most cannot. We built our production records around it.
Plot geolocation
GPS coordinates and polygons (GeoJSON) for the harvest areas behind your order — the format the EU Information System expects.
Batch traceability
Records linking your specific container back to raw material and harvest area, so a spot check doesn't dead-end.
Legality evidence
Harvest permits, species and origin declarations, and mill documentation — organised as a file, not a folder of phone photos.
We prepare and screen the evidence — we are not a certification body, and the DDS filing remains the EU operator's legal responsibility.
Four ways to buy wood from Vietnam
Marketplaces, sourcing agents and inspection firms each solve one piece. We are the manufacturer and the verification layer at once — which is the unusual part.
| B2B marketplace | Sourcing agent | Inspection firm | LELOI | |
|---|---|---|---|---|
| You know exactly which mill produced your panels | No | No | Sometimes | Yes |
| Someone physically visits the production line | No | Sometimes | Yes | Yes |
| EUDR / traceability documents prepared for you | No | No | No | Yes |
| Vietnam-law contracts & dispute-ready evidence | No | No | No | Yes |
| One point of contact across plywood and millwork | Sometimes | Sometimes | No | Yes |
| Custom profiles and grades tooled to your drawing | No | Sometimes | No | Yes |
means “sometimes, depending on who you get”. If you already have a supplier you trust, use us for verification only — that is a real option, not a consolation prize.
From specification to sealed container
You see evidence at every stage — not a silence that ends with a container at your port.
Send your specification
Product, size, thickness, glue grade, face grade, quantity, destination port and Incoterm. Two minutes on the form, or a message on WhatsApp.
Get a quote and a sample
We reply within 24 hours with price, lead time and available capacity. Samples ship on request so you approve the real thing before committing.
Production with evidence
You receive production photos, in-line QC records and the compliance pack — EUDR geolocation, traceability and legality documents — as the order is built, not after.
Loading you can witness
Pre-shipment inspection and loading photos before the container seals, then full export documentation handed over for customs at your end.
Inside our factory
Planted-forest timber, veneer peeling, hot press and finishing lines. Photographed on site, not stock images.
The questions buyers actually ask us
What is your minimum order quantity?+
Normally one 20ft or 40ft container per product line. You can mix within a line — several thicknesses or grades of plywood in the same load, for instance — because those come off the same press. Plywood and moulding are made at different mills at opposite ends of Vietnam, so they ship as separate loads rather than sharing a container. Tell us your target volume and we will tell you honestly whether it works.
Can you supply the EUDR documents my customs broker needs?+
Yes. Every wood order ships with plot geolocation (GeoJSON), batch-level traceability linking the shipment back to harvest areas, and legality documentation. This is the data your Due Diligence Statement is built from. Note the legal responsibility for filing the DDS remains with you as the EU operator — we supply the evidence, you make the declaration.
Which certifications do you hold?+
FSC Chain-of-Custody, CE — EN 13986 plywood, CARB Phase 2 / TSCA Title VI, AS 6669-2016 formwork plywood, CE marking — EN 13986. Certificates are issued per product and per mill, so we send the exact documents covering your order rather than a generic bundle — ask and we will match them to your specification.
What payment terms do you offer?+
Typically 30% deposit with the balance against a copy of the bill of lading, or an irrevocable L/C at sight for larger programs. For a first order we would rather agree terms that let you verify us cheaply than push you into a large upfront payment.
How do I know the bulk order will match my approved sample?+
Production photos and QC records during the run, plus a pre-shipment check before the container is sealed. You approve a physical sample first, and the approved sample is the reference we are held to — if you want a third-party inspector of your own choosing to attend loading, that is welcome and we will schedule around them.
How fast can you ship?+
Lead time depends on the product and the season. Packing plywood moves fastest; primed moulding with custom profile tooling takes longest because we cut knives to your drawing. We quote a real date with the price, and tell you early if it slips.
Request a quote
Two minutes to fill in · we reply within 24 hours with price, lead time and availability. No account needed.
Prefer to talk to a person first?
Message us on WhatsApp and you will reach our sales team in Vietnam, not a chatbot. Send a profile drawing or a photo of the panel you are buying now and we will tell you straight whether we can match it.
LELOI EXIM GLOBAL CO., LTD · Tax ID 2802935153 · No 775 Nguyen Trai Street, Hac Thanh Ward, Thanh Hoa Province, Vietnam. Test reports and certificates refer to the samples tested and the products those reports cover — final compliance responsibility rests with the importing operator.
What are you building with it?
One mill, three kinds of buyer — pick the one that fits.
Contractors & formwork
Film-faced panels for concrete formwork — 8–15 pours, edge-sealed against water, logo branding on request. F-grade to AS 6669 for Australian projects.
See formwork plywoodFurniture & cabinet shops
Veneer-faced and commercial plywood plus primed moulding — face grade stated plainly, glue chosen for your market's indoor-air rules.
See interior panelsMaterial distributors
Several specifications in one load, private label, and specifications built around your retail programme — with CARB P2 / TSCA for the US and CE EN 13986 for Europe.
See all product lines