Solutions

Interior & Furniture

Panel and component solutions for furniture, cabinetry and interior fit-out.

What buyers specify first

01Surface quality
02Machinability
03Emissions class
04Dimensional consistency

Product systems for this application

Veneer-Faced Plywood

Decorative panels — natural veneer or melamine, ready to finish

See specifications

Commercial Plywood

Multi-purpose panels for furniture, interior & packaging

See specifications

Finger-Joint Panel — Acacia & Rubberwood

Edge-glued panels to 1300 × 6000 mm — solid wood that stays flat

See specifications

Side by side

The shortest way to rule one out. Full specifications are on each product page.

Product	Typical specification	Surfaces / variants
Veneer-Faced Plywood	1220×2440 (4' × 8') · 1250×2500 (49-3/16" × 98-7/16") mm · Thickness 3–25 mm (1/8"–1") · Birch / oak / ash / walnut face	Birch veneer · Oak veneer · Ash veneer · Walnut veneer
Commercial Plywood	1220×2440 (4' × 8') · 1250×2500 (49-3/16" × 98-7/16") · 1200×2400 (47-1/4" × 94-1/2") mm · Thickness 3–25 mm (1/8"–1") · MR / WBP glue	Bintangor · Okoume · Birch · Keruing
Finger-Joint Panel — Acacia & Rubberwood	Thickness 15 · 18 · 20 · 25 · 38 mm (9/16"–1-1/2") · Up to 1300 × 6000 mm (51-3/16" × 19' 8") · Acacia or rubberwood	Rubberwood — pale and uniform, best under paint · Acacia — harder, warm variegated grain · Grade AC — clear face, hidden back · Grade BC — sound colour variation on the face

Technical specification

Measured values from production samples. Every line below is configurable — tell us the target and we build to it.

Veneer-Faced Plywood11 fields

Face species: Birch · Oak · Ash · Walnut natural veneer, or melamine (white / wood décor)
Panel sizes: 1220×2440 mm (4' × 8') · 1250×2500 mm (49-3/16" × 98-7/16")
Thickness: 3 – 25 mm (1/8" – 1")
Glue / emission class: MR, E1 or E0 depending on destination indoor-air rules
Formaldehyde emission: 0.05 mg/m³ by chamber method — E1 limit is 0.124 mg/m³
Packaging: Pallet packed, corner protection, PP strapping, plastic-wrapped; export marks per your instruction
Loading reference: One 40ft HC carried 853 sheets of 21 mm at 26,900 kg / 44 m³ on a real shipment — thick panels hit the weight limit before the volume limit
Minimum order: One 20ft or 40ft container per product line; specifications may be mixed within a line
Lead time: Quoted as a specific date with the price — varies by product, season and raw-material supply
Incoterms: FOB, CIF, CFR, EXW, DDP
Private label: Available — logo on panel face, custom marks and packaging

Commercial Plywood15 fields

Core species: Poplar or hardwood (acacia / eucalyptus), planted forest
Face species: Bintangor · Okoume · Birch · Keruing · Pencil cedar
Panel sizes: 1220×2440 mm (4' × 8') · 1250×2500 mm (49-3/16" × 98-7/16") · 1200×2400 mm (47-1/4" × 94-1/2")
Thickness: 3 – 25 mm (1/8" – 1")
Glue / bond class: MR (interior) or WBP (exterior)
Face grade: BB/CC standard; other grades to order
Formaldehyde emission: 0.05 mg/m³ by chamber method on eucalyptus-faced panel — E1 limit is 0.124 mg/m³
Density: ≈ 0.70 g/cm³ (hardwood core, tested)
Moisture content: 8 – 12 %
Packaging: Pallet packed, corner protection, PP strapping, plastic-wrapped; export marks per your instruction
Loading reference: One 40ft HC carried 853 sheets of 21 mm at 26,900 kg / 44 m³ on a real shipment — thick panels hit the weight limit before the volume limit
Minimum order: One 20ft or 40ft container per product line; specifications may be mixed within a line
Lead time: Quoted as a specific date with the price — varies by product, season and raw-material supply
Incoterms: FOB, CIF, CFR, EXW, DDP
Private label: Available — logo on panel face, custom marks and packaging

Finger-Joint Panel — Acacia & Rubberwood12 fields

Species: Plantation acacia or rubberwood, kiln dried before jointing. Rubberwood is pale and close to uniform, so it is the one to pick under paint or a light stain where every panel has to match. Acacia is harder and darker with warm variegated grain — pick it when the wood is meant to be seen.
Construction: Staves finger-jointed end to end, then edge-glued into a panel with grain direction alternated so seasonal movement cancels instead of accumulating across the width
Thickness: 15 mm (9/16") · 18 mm (11/16") · 20 mm (13/16") · 25 mm (1") · 38 mm (1-1/2")
Maximum panel size: Width to 1300 mm (51-3/16"), length to 6000 mm (19' 8"). Panels are cut to your list — send the cutting list rather than asking which sizes we hold.
Face grades: AC and BC. The A face is clear and takes a visible finish; B allows sound colour variation and small tight knots; C is the back — the side that sits against a wall or underneath. Say which face will be seen and we grade to that, not to a catalogue letter.
Finish: Raw and sanded, natural — ready for your finishing line
Shipped example: 3658 × 635 × 38 mm — 12' × 25" × 1-1/2", grade AC, raw natural, 29 pieces per pallet
Packaging: Pallet packed, corner protection, PP strapping, plastic-wrapped; export marks per your instruction
Minimum order: One 20ft or 40ft container per product line; specifications may be mixed within a line
Lead time: Quoted as a specific date with the price — varies by product, season and raw-material supply
Incoterms: FOB, CIF, CFR, EXW, DDP
Private label: Available — logo on panel face, custom marks and packaging

Values come from tested production samples. They describe what the line runs today, not a fixed guarantee — the specification on your order is agreed before production starts.

Documents that ship with the goods

Each certificate names the mill and product it covers, and the date it expires — so you can check it against your own order instead of taking a scan on trust.

All documents

FSC Chain-of-Custody

SGS Hong Kong

Purchase of FSC 100% logs and veneer; manufacture and sale of FSC 100% / FSC Mix veneer plywood, wood chips, peeled veneer, veneer MDF and planks (transfer system)

FSC Chain-of-Custody

SGS Hong Kong

Purchase of FSC 100%, FSC Controlled Wood logs, veneer and FSC Recycled impregnated papers; manufacture and sale of FSC 100%, FSC Mix and FSC Controlled Wood veneer, plywood and LVL (transfer system)

CE — EN 13986 plywood

Istituto Giordano

Hardwood-faced and film-faced plywood, thickness 3.6–30 mm, MUF and PF glue — structural use in dry, humid and external conditions

FSC Chain-of-Custody

SGS Hong Kong

Purchase of FSC 100% logs, peeled veneer, FSC Mix MDF and impregnated papers; manufacture and sale of FSC 100% peeled veneer, FSC 100% / FSC Mix veneer plywood and FSC Mix MDF (transfer system)

Send the specification, not just the product name

Tell us the application, the dimensions and the destination market. We confirm what is producible before quoting.

Drawing or sample accepted
Reply within 24 hours
Documents matched to your market
Sample length before the order

Send Your Specification